High Pressure Two Stage Screw Compressor With Direct Driven 1800x1000x1370mm
New generation of highly efficient imported host machine
- Advanced 8d Energy saved spiral tooth-type technology
- New-type 5:6 asymmetrical rotator tooth type
- Drawing uses leitz high-precision CMM measuring machine
- Adopt top-level quality SKF taper-roller bearing imported with original packaging from Sweden
- Relative power increases by more than 5%-10% in gas discharge when compared with that of ordinary machine model
Highly efficient permanent magnetic motor
- Reasonable structure and high power density
- Very small rotator inertia and very fast response speed
- Ultrahigh intrinsic coercive rare earth permanent magnetic material with strong anti demagnetizing capacity
- Possible constant torque output within scope of locked rotator and rated rotating speed
- Special asymmetrical magnetic circuit design, making low-rotating-speed torque ripple small
- High balancing precision, stable and high-speed operation, low noise and small vibration
- Full-sealed or high protection-grade appearance structural design
SKF bearing
Compared with bearings of other brands, SKF bearing, it has good abrasive resistance, superior fatigue resistance, strong corrosion resistance and comfortable muting property, making longer service life, higher reliability and lower noise of permanent magnet synchronous non-inductive motor.
Two-stage energy-saving screw compressor-technical parameters
|
Model
|
Power
(KW)
|
Capacity/Pressure
( m3/mpa)
|
Outlet size
|
Weight
(kg)
|
Unit size mm
(LxWxH)
|
| WZS-40AZI1 WZS-40PM-2S |
30 |
7.2m3/0.5mpa |
RP11/2 |
1550 |
1800x1000x1370 |
| 6.4m3/0.8mpa |
| 4.9m3/1.0mpa |
| 4.2m3/1.25mpa |
| WZS-50AZI1 WZS-50PM-2S |
37 |
10m3/0.5mpa |
RP11/2 |
1900 |
2050x1260x1600 |
| 7.1m3/0.8mpa |
| 5.9m3/1.0mpa |
| 5.4m3/1.25mpa |
| WZS-60AZI1 WZS-60PM-2S |
45 |
12m3/0.5mpa |
RP2 |
2100 |
2050x1260x1600 |
| 9.8m3/0.8mpa |
| 7.8m3/1.0mpa |
| 6.5m3/1.25mpa |
| WZS-75AZI1 WZS-75PM-2S |
55 |
13.8m3/0.5mpa |
RP2 |
2200 |
2100x1360x1660 |
| 12.5m3/0.8mpa |
| 10.5m3/1.0mpa |
| 8.6m3/1.25mpa |
| WZS-100AZII WZS-100PM-2S |
75 |
18.5m3/0.5mpa |
DN65 |
2800 |
2100x1360x1660 |
| 16m3/0.8mpa |
RP2 |
| 13m3/1.0mpa |
| 10m3/1.25mpa |
| WZS-125AZII WZS-125PM-2S |
90 |
23m3/0.5mpa |
DN65 |
2800 |
2650x1650x1900 |
| 18.5m3/0.8mpa |
| 16m3/1.0mpa |
| 12m3/1.25mpa |
Two-stage energy-saving screw compressor-technical parameters
|
Model
|
Power
(KW)
|
Capacity/Pressure
( m3/mpa)
|
Outlet size
|
Weight
(kg)
|
Unit size mm
(LxWxH)
|
| WZS-150AZII WZS-150PM-2S |
110 |
28m3/0.5mpa |
D_ |
3200 |
2650x1650x1900 |
| 23m3/0.8mpa |
| 18.5m3/1.0mpa |
| 15m3/1.25mpa |
| WZS-180AZII WZS-180PM-2S |
132 |
32.5m3/0.5mpa |
DN80 |
3500 |
2650x1650x1900 |
| 28m3/0.8mpa |
| 23m3/1.0mpa |
| 18m3/1.25mpa |
| WZS-220AZ11 WZS-220PM-2S |
160 |
41m3/0.5mpa |
DN125 |
4100 |
3200x1750x2350 |
| 32.6m3/0.8mpa |
| 27m3/1.0mpa |
| 2Bm3/1.25mpa |
| WZS-250AZII WZS-250PM-2S |
185 |
45 m 3/0.5m pa |
DN125 |
4500 |
3200x1750x2350 |
| 38m3/0.8mpa |
| 41m3/1.0mpa |
| 26m3/1.25mpa |
| WZS-270AZ11 WZS-270PM-2S |
200 |
50m3/0.5mpa |
DN150 |
5100 |
3200x1750x2350 |
| 46m3/0.8mpa |
| 38.5m3/L0mpa |
| 32m3/1.25mpa |
| WZS-300AZ11 WZS-300PM-2S |
220 |
54m3/0.5mpa |
DN150 |
6200 |
3880x2250x2350 |
| 50m3/0.8mpa |
| 41.5m3/1.0mpa |
| 40m3/1.25mpa |
FAQ:
1. Before quoting, what should users offer?
1). Discharge pressure (Bar, Mpa or Psi)
2). Air discharge/Air flow/Air capacity (m3/min or CFM)
3). Power supply (220/380V, 50/60Hz, 3Phase)
2. If I don't know the pressure and air flow, what should I do?
1). Take the picture of nameplate, we will advise the suitable air compressor to you.
2).T ell us what industry you are, we can advise the suitable one (so as to air tank / air dryer / air filters).
Product Tags:
|
|
High Pressure Two Stage Screw Compressor With Direct Driven 1800x1000x1370mm Images
|
